Turbine meter Vision® 2000

for low viscous, non aggressive liquids and low flow rates

DN6, DN8
Many mechanical connections selectable (NPT, BSP, O-ring, hose nippel)
Trogamid, Grilamid, brass housing
High operating pressure
NSF, WRAS

Medium:
Water, Chemical/Petrochemical media, Pharmaceutical media

max. flow:
from 0.5 up to 35 l/min

Temperature:
from -20 up to 100 °C

max. pressure:
from 0 up to 25 bar

Branch:
Water & waste water industry, Food & beverage industry, Chemical industry, Oil industry, General industry, Pharmaceutical industry, Aerospace industry

General information

The liquid turbine meters of the series Vision® 2000 are for the exact measuring of small quantities of liquids. The actual flow as well as the already passed flow can be measured.

Technical data

Material	Grilamid TR 55 (PA 12) / Trogamid / Brass
Viscosity range	0,8 – 16 mm²/s
Accuracy	±3 % of value
Repeatability	< 0,5 %
Temperature range	-20 °C up to +100 °C
Operating pressure	25 bar max.
Electrical connection	Electrical connector EN 60529 / AMP Faston or cable connection
Power supply	5 – 24 VDC
Output signal	Open collector NPN pulse
Process connections	G 3/8", NPT 3/8", o-ring
Approvals	KTW, NSF, WRAS

Measuring principle

Turbine meters

Turbine meters are volumetric meters. When the fluid passes through, a rotor is activated and the movement is either electronically or mechanically transmitted outside.

Datasheet_EN.pdf

Overview/Flyer_EN.pdf